diyobd2 car diagnostic tools

Condor XC-MINI Key Cutting Machine 4 Clamp Introduction

diycar | 16 May, 2018 13:45

Condor XC-MINI machine standardly includes two clamps M1 and M2. Supported sided, track, dimple and tibble keys.Some Dimple/Tibble keys need M3 optional clamps,M3 clamps used for Ford FO21 and Citroen SX9 keys.

condor mini clamp

And condor mini will release M4 clamp soon.

condor mini m4 clamp condor mini m4 clamp

Power Supply Adapter with Battery Works For Condor XC-MINI Key Cutting Machine Coming Soon

PN:XCMN04EN
Brand:Xhorse

Power Supply Adapter (With Battery) Specifiction:
Limited charge:29.4V
Nominal voltage:25.9V
Nominal capacity:2500mAh

Accessoried illustration:
No need to connect Car Inverter, battery as power supply, easy to carry. Support household electricity and cigarette lighter to recharge or use as power supply. Support recharging and working at same time, with high-capacity up to 76.5Wh, cutting more than 40 key blanks. Maximum working voltage no more than 30V, built-in muti-safty protection, to avoid short in circuit problems.

condor mini battery

How to choose the positioning method and clip the key for SEC-E9 key machine

diycar | 16 May, 2018 13:44

The following video teaches points:

Toyota, Honda, Volkswagen, Buick key clips and positioning options to explain.

Choose the positioning method and clip the key for SEC-E9 key machine

Operation points for attention:

1.1. Take TOY43 Toyota Key as an example, enter “Data Search” and input “TOY43” , select “SILCA” and select the first 10 teeth;

altalt

1.2, enter the bottom "menu" - "information", view the positioning method;

alt

altalt

1.3, click on the "detection key data", according to the corresponding icon to place the key, flat milling upper clip, vertical milling lower folder;

alt

alt

2.1. Take the Honda Key as an example, enter “Data Search” and input “HON66” and select “SILCA”.

altalt

alt

2.2, enter the bottom "menu" - "information", view the positioning method;

altalt

2.3, click on the "detection key data", in accordance with the corresponding icon to hold the key, flat milling upper clip, vertical milling lower folder;

alt

alt

3.1. Take the VW key as an example. Enter “Data Search” and input “HU66” and select “SILCA”.

alt

3.2, enter the bottom "menu" - "information", view the positioning method;

alt

3.3. Click on "Test Key Data", then place the key in accordance with the corresponding icon, flat-clamp the upper layer, and mill the lower layer. Use the positioning tab to lock the key shoulder and press the key clip in parallel on the fixture;

alt

4.1. Take the Buick Key as an example, enter "Car" to input "B" and select "B Buick"-"E Excelle [8]";

altalt

4.2, enter the bottom "menu" - "information" to see the positioning method;

altalt

4.3, click on the "detection key data", in accordance with the appropriate icon to clamp the key, flat milling upper clip, vertical milling lower folder;

alt

alt

 
Provided by Multiblog.net - easy blogging platform
P0wered by L1fe7ype - De51gn by Ba1earWe6